Different types ps foam fast food box vaccum forming machine with
Fully automatic vacuum forming machine integrates forming and
cutting at the same time, also the foam products could come out
This type of developed by combining the domestic equipment and
advantages, is a set of hydraulic pneumatic servo drive for an
automatic forming cutting seek. Mainly by electrical components,
Japan and Germany pump, ensure the reliability of the equipment
operation, and can be used for hot forming process many kinds of
plastic material, it can produce PSP, PVC, PE, PP, PET, HIPES etc
all kinds of packaging products, materials used in food, medical
supplies, electrical components, tourism products, toys, textile,
The biggest advantage is forming cutting integration, reduce work
link, produce the product directly, it can be collected in stacking
area of work to save time, save the production base and greatly
reduces the working intensity save artificially.
1. Suck and pull the food containers up. Even the containers don’t
be sucked out successfully, this won’t affect next move.
2. There are one conveyor belt on each side, both can achieve
automatically stacking, reduce labor intensity.
3. Heater box separate into three parts, hydraulic cutting speed is
faster, and use mechanical arms to suck products, all above methods
reduce the whole working time.
4. Extend mold length, making the forming mold area larger and
improving the production efficiency.
Main technical parameters
|Power supply||Three phase 380V/50Hz|
|Production efficiency||2.8-5 s/mold|
|Installed power (approximately)||230KW|
|Total weight (approximately)||16-18T|
|Compressed air||0.4～0.7 m3/min,0.7Mpa|
|Max. forming area||mm2||1000×1100|
|Max. forming depth||mm||80|
|Production efficiency||s/die||3 - 8|
PS food container machine mainly including three main parts:
1. PS foam sheet extruder: make PS foam sheet from raw material
2. Fully auto forming and cutting machine: make PS sheet to finished products, such as PS foam tray, PS foam
box etc (we can design mould according to customer requirements)
3. Plastic recycle machine: recycle waste products to granules, the can mix with new material
and put into PS foam sheet extruder again